Asian
08-22 01:02 PM
I think it still helps. Skil bill is the best bet and method we got so far. However, it seems to me we are underestimating it. We need to put more concentrated and focused effort on it.
See page 3 on this:
http://www.competeamerica.org/resource/h1b_glance/NFAP_Study.pdf
If per country limit of 7% stays, how much relief would it bring in terms of
priority dates for India/China born individuals?
I do not think there shall be any significant positive movement in Priority dates. Even if annual numbers go to 290K from 140K and dependents are excluded. It is about 4 times meaning if earlier we had 10K for India including sposes meaning 5K effectively, now it will be appx 20K effectively!
Think of number of applicants from India and China and think of the flood coming when all backlog is cleared! I dont think we should expect big jump in priority dates.
Am I getting too pessimistic?
See page 3 on this:
http://www.competeamerica.org/resource/h1b_glance/NFAP_Study.pdf
If per country limit of 7% stays, how much relief would it bring in terms of
priority dates for India/China born individuals?
I do not think there shall be any significant positive movement in Priority dates. Even if annual numbers go to 290K from 140K and dependents are excluded. It is about 4 times meaning if earlier we had 10K for India including sposes meaning 5K effectively, now it will be appx 20K effectively!
Think of number of applicants from India and China and think of the flood coming when all backlog is cleared! I dont think we should expect big jump in priority dates.
Am I getting too pessimistic?
wallpaper dia san valentin poemas
eb3_nepa
10-06 03:46 PM
If your I-485 EAD comes through you have to use that and not the F1 EAD.
Where did you get this information from? Can you please show a source?
Where did you get this information from? Can you please show a source?
PixelPix
February 2nd, 2004, 01:40 AM
I look at this image and find no main point of interest, my eye is left to simply rome around the image and is not driven to "the" subject matter.
I had a quick play.... a slight rotate, crop and clone to come up with this...
http://www.potd.com.au/TESTS/153littleflowers.jpg
The diagonal line leads you in from the rear to the main flower, while the same happens from the front. You could play with the DOF of this image also (either in camera of PS) as narrow DOF would help draw attention to main subject flower of your choice, eg:.....
http://www.potd.com.au/TESTS/153littleflowers_BLUR.jpg
http://www.potd.com.au/TESTS/153littleflowers_BLUR2.jpg
Also, the eye will naturally fall to the brightest part of an image, so all background flowers that may have distracted from subject flower have been cloned out.
I hope this helps.
Russell
PS.... They were really quick PS mods and are a bit "hows your father", but they're intended simply to give an idea. :-)
I had a quick play.... a slight rotate, crop and clone to come up with this...
http://www.potd.com.au/TESTS/153littleflowers.jpg
The diagonal line leads you in from the rear to the main flower, while the same happens from the front. You could play with the DOF of this image also (either in camera of PS) as narrow DOF would help draw attention to main subject flower of your choice, eg:.....
http://www.potd.com.au/TESTS/153littleflowers_BLUR.jpg
http://www.potd.com.au/TESTS/153littleflowers_BLUR2.jpg
Also, the eye will naturally fall to the brightest part of an image, so all background flowers that may have distracted from subject flower have been cloned out.
I hope this helps.
Russell
PS.... They were really quick PS mods and are a bit "hows your father", but they're intended simply to give an idea. :-)
2011 poemas para san valentin
ps57002
10-05 05:09 PM
Thanks tnite for reassurance/hope...really need it :)
more...
indyanguy
10-22 11:43 AM
My Labour was For EB-3 and my I-140 was filled in EB2
One of my Colleague also had same case but he got query on his
I-140 and mine got denied
I have a question
Now I will have to file new labour and I-140 can
Will I loose my old priority dates
How can the labor be filed under EB3 and the 140 under EB2? Is this possible only if Labor mentioned BS + 5 (or MS) as the requirement even though it was filed under EB3?
Anyone care to throw some light on this?
One of my Colleague also had same case but he got query on his
I-140 and mine got denied
I have a question
Now I will have to file new labour and I-140 can
Will I loose my old priority dates
How can the labor be filed under EB3 and the 140 under EB2? Is this possible only if Labor mentioned BS + 5 (or MS) as the requirement even though it was filed under EB3?
Anyone care to throw some light on this?
gcpain
07-24 04:42 PM
Thanks for clarification.
more...
iman.karta
04-23 11:32 AM
Quick question you said they asked you to submit your legal status papers since 1999 which was when you went out of country? I have 2 questions
1) Since when have you been in US, rather first time when did you come to US
2) Did you never leave US after 1999. This is because the status really matters only since your last arrival on visa. Earlier records do not matter as per 245(k) memo. This question will help other forum members who have some kind of status violation
your responses will be appreciated.
Rockstart,
I apologize for the tardy response.
I first entered the US in 1997 using F-1 visa. I traveled back to Indonesia (my home country) 1999 for the holiday. After that, I never travelled out of the US. Since then, I have worked and obtained H1-B and am in the last stage of I-485. PD is ROW (of course) and biometrics code 3 was done a while ago. Hence, I believe USCIS requested RFE since 1999; the last time I travelled out of the country.
I always maintain a legal status.
I hope this helps. If you have rather a more personal msg, please feel free to email me. I am more than glad to give you more info and help you.
1) Since when have you been in US, rather first time when did you come to US
2) Did you never leave US after 1999. This is because the status really matters only since your last arrival on visa. Earlier records do not matter as per 245(k) memo. This question will help other forum members who have some kind of status violation
your responses will be appreciated.
Rockstart,
I apologize for the tardy response.
I first entered the US in 1997 using F-1 visa. I traveled back to Indonesia (my home country) 1999 for the holiday. After that, I never travelled out of the US. Since then, I have worked and obtained H1-B and am in the last stage of I-485. PD is ROW (of course) and biometrics code 3 was done a while ago. Hence, I believe USCIS requested RFE since 1999; the last time I travelled out of the country.
I always maintain a legal status.
I hope this helps. If you have rather a more personal msg, please feel free to email me. I am more than glad to give you more info and help you.
2010 poemas para san valentin
WaldenPond
05-25 06:59 AM
Thanks for sending the webfaxes. But that would not be enough. Please make phone calls as well. Please tell/email all your friends to do the same.
Here is the link that provides information about the talking points and phone numbers of the key Senator offices:
http://immigrationvoice.org/forum/showthread.php?t=942
Here is the link that provides information about the talking points and phone numbers of the key Senator offices:
http://immigrationvoice.org/forum/showthread.php?t=942
more...
maximus777
05-28 02:44 PM
Are USCIS related expenses like visa/lawyer fees etc. tax deductible? :confused:
hair feliz san valentin poemas.
mkolp
07-07 11:51 AM
Good idea
more...
rbritt1268
December 21st, 2007, 08:48 AM
Thanks for this Jason. I've often wondered why Olympus and Pentax haven't stepped up and gotten in the dslr market with the other big boys. My first camera was a Pentax K1000 (which I still have) and it was great. When I first decided to get into the dslr game myself I was disappointed to find so few choices of manufacturers.
It's good to see Olympus getting in the game. They've always had a solid product and I'm sure they will work out their design flaws.
It's good to see Olympus getting in the game. They've always had a solid product and I'm sure they will work out their design flaws.