astral1977
12-19 12:10 PM
Goel_ar,
Your manner of last entry is the status that you are currently on. Thats a fact.
This is most probably what happened in your case. You were first on H-4, then H-1 got approved in June'08. In the H-1 approval notice, did you get an I-94 attached at the bottom. If yes, then your status changed to H-1 automatically. Now, since you got back into the country in Sept'08 on H-4, it changed back to H-4.
Either you have to go to a consulate aboard and get H-1 stamp and enter using H-1 visa. Or apply for change of status within the country. However, whenever you leave the country, you will have to apply for H-1 visa stamp and use it later to enter.
Hope it helps.
My h1 got approved in june 2008. I did travel to China in September & entered back on Sep 10 using H4. Is it possible that my entry changed my latest status to H4?
Thanks,
LG.
Your manner of last entry is the status that you are currently on. Thats a fact.
This is most probably what happened in your case. You were first on H-4, then H-1 got approved in June'08. In the H-1 approval notice, did you get an I-94 attached at the bottom. If yes, then your status changed to H-1 automatically. Now, since you got back into the country in Sept'08 on H-4, it changed back to H-4.
Either you have to go to a consulate aboard and get H-1 stamp and enter using H-1 visa. Or apply for change of status within the country. However, whenever you leave the country, you will have to apply for H-1 visa stamp and use it later to enter.
Hope it helps.
My h1 got approved in june 2008. I did travel to China in September & entered back on Sep 10 using H4. Is it possible that my entry changed my latest status to H4?
Thanks,
LG.
sury
10-28 10:30 PM
We recieved EADs 3 weeks back and I am planning to apply SSN for my wife and kid.
Can anyone let me know what documents are required to show up at SSN office while applying SSN.
Thanks,
Sury
Can anyone let me know what documents are required to show up at SSN office while applying SSN.
Thanks,
Sury
jliechty
May 28th, 2007, 09:24 PM
Visible Dust products used to cost way more than they were worth (they're still expensive, but not as prohibitive as they were previously). At that time, I found this article (http://www.prime-junta.net/pont/How_to/a_Brush_Your_Sensor/a_Brush_Your_Sensor.html?page=1), which offers a much less expensive suggestion. It could be worth checking out if you want to try a brush almost identical to the VD products without paying their high prices (a bit of "elbow grease" is required - just be careful to keep it off the sensor!). ;)
BornConfused
07-03 09:47 AM
Ha, congratulations to you, I'm happy for you!!
more...
WeShallOvercome
12-26 12:49 PM
I suppose you are living in USA.
On the second option "non-resident alien", if you are residing in USA, then you are not considered as non-resident. So I would eliminate this option.
On the first option "non-permanent resident alien", if you are residing in USA, I would choose this as the right option. Since holding an H1B means that you are a temporary (non-permanent) resident alien. Holding an EAD does not allow you to stay here permanently. It is only a temporary authorization to allow you to work without H1B. Remember that it requires renewal every year.
To answer your question, you are a non-permanent resident alien.
Venram,
I'm afraid your understanding of the term 'resident' or 'non-resident' is not correct.
In US immigration jargon, a resident-alien is someone who lives and works in US on a permanent basis- like on a Green card.
The term non-resident here does not mean that you are not residing in the US. It only means that you are an alien, living and/or working in the US on a temporary basis, and you are not a (Permanent) resident.
Resident alien - An alien living here on a permanent basis
NonResident Alien - An alien living here on a temporary basis
I've never heard of the term 'non-permanent Resident alien'.. I think it is same as non-resident alien..
On the second option "non-resident alien", if you are residing in USA, then you are not considered as non-resident. So I would eliminate this option.
On the first option "non-permanent resident alien", if you are residing in USA, I would choose this as the right option. Since holding an H1B means that you are a temporary (non-permanent) resident alien. Holding an EAD does not allow you to stay here permanently. It is only a temporary authorization to allow you to work without H1B. Remember that it requires renewal every year.
To answer your question, you are a non-permanent resident alien.
Venram,
I'm afraid your understanding of the term 'resident' or 'non-resident' is not correct.
In US immigration jargon, a resident-alien is someone who lives and works in US on a permanent basis- like on a Green card.
The term non-resident here does not mean that you are not residing in the US. It only means that you are an alien, living and/or working in the US on a temporary basis, and you are not a (Permanent) resident.
Resident alien - An alien living here on a permanent basis
NonResident Alien - An alien living here on a temporary basis
I've never heard of the term 'non-permanent Resident alien'.. I think it is same as non-resident alien..
sbvw76
10-09 10:42 AM
For the past 2 renewals in FL for me it was like that. They will give exactly for 1 year and will have TEMPORARY in red color font.
Couple of times during travel, Airport TSA authorities asked me why it is temporary in DL and asked me do you have any other photo id proof. So I started carrying Passport with me during the travel to avoid this mess.
Couple of times during travel, Airport TSA authorities asked me why it is temporary in DL and asked me do you have any other photo id proof. So I started carrying Passport with me during the travel to avoid this mess.
more...
nc14
07-08 05:52 PM
I was on my way today for the drive in Cincinnati with 3 others and called them on my way when they informed us that they had an overwhelming response yesterday and are out of kits. They said they will be back the coming weekend and again. I am praying that he gets the donor ASAP. Hoping for the best.
GO IV GO....
GO IV GO....
sounakc
07-10 05:49 PM
thanks for your prompt reply...
cheers
You can not .. you will need to wait until EB-2 PD cut off is Jan 2004. family based is different kind of fruit (I don't want to call it animal) :-)
cheers
You can not .. you will need to wait until EB-2 PD cut off is Jan 2004. family based is different kind of fruit (I don't want to call it animal) :-)
more...
martinvisalaw
06-05 01:40 PM
A person with a 485 pending is allowed to remain in the US. There is no name for this "status", but it is lawful to stay in the US, and to work using an EAD.
For those with questions about AOS portability - you should show a new job offer letter if CIS asks for it - either in an RFE or at an interview. There is no legal requirement to notify CIS if you change jobs while the RFE is pending, unless they ask about it. CIS does expect that AOS applicants will notify CIS if they change jobs, however.
For those with questions about AOS portability - you should show a new job offer letter if CIS asks for it - either in an RFE or at an interview. There is no legal requirement to notify CIS if you change jobs while the RFE is pending, unless they ask about it. CIS does expect that AOS applicants will notify CIS if they change jobs, however.
gcisadawg
03-09 07:21 PM
My 140 was filed in Nov 2006. I had to wait 2 full years before my case got approved in Nov 2008.
My lawyer did not even open a service request. She was against infopass too. Her reason was that these would work for any other case except 140.
Based on my experience, I would recommend the following:
1. Ask your lawyer to go through AILA. This is the most preferred way and should work in 99% of the cases (This is what worked for me though it took a lot of time)
2. If option 1 does not work, try to go through your local congressman.
Hope this helps. All the best.
My lawyers filed a Service Request and I contacted the local congressman for my Pending I-140 at TSC. Should I be worried since those actions would jeopardize my case?
-G
My lawyer did not even open a service request. She was against infopass too. Her reason was that these would work for any other case except 140.
Based on my experience, I would recommend the following:
1. Ask your lawyer to go through AILA. This is the most preferred way and should work in 99% of the cases (This is what worked for me though it took a lot of time)
2. If option 1 does not work, try to go through your local congressman.
Hope this helps. All the best.
My lawyers filed a Service Request and I contacted the local congressman for my Pending I-140 at TSC. Should I be worried since those actions would jeopardize my case?
-G
more...
gc_kaavaali
12-10 06:57 PM
in my view software engineer and business analyst are NOT similar. One deals with generating lines of code and the other is taking requirements...in my view both are different...talk to your attorney...it is just my view only...and u know i am neither expert nor an attorney...
a_yaja
01-13 11:51 AM
Sure, I will try to do that. But the lawyer has a mind of his own, a very adamant one who would not listen to anyones suggestions. Also, I am racing against time. I have very little time to get new EVLs and have my lawyer submit them. Thanks for the suggestion.
Did your exp. letter have the number of hours (40hrs/ week) mentioned? I had an RFE for my I-140 as well (one of the points in the RFE was for exp.) . The exp. letters I submitted did not mention 40 hrs/ week. I got the letters reissued with 40 hrs/ week and that cleared the RFE. The RFE clearly mentioned that the exp. letter did not specify the number of hours worked per week.
Make sure that the exp. letters match the requirements and your experience in the the approved Labor Certification - if all the requirements do not match, that could be a reason for the RFE as well.
Did your exp. letter have the number of hours (40hrs/ week) mentioned? I had an RFE for my I-140 as well (one of the points in the RFE was for exp.) . The exp. letters I submitted did not mention 40 hrs/ week. I got the letters reissued with 40 hrs/ week and that cleared the RFE. The RFE clearly mentioned that the exp. letter did not specify the number of hours worked per week.
Make sure that the exp. letters match the requirements and your experience in the the approved Labor Certification - if all the requirements do not match, that could be a reason for the RFE as well.
more...
kaisersose
07-23 09:01 AM
All,
I feel that those who concurrently filed I-140/485 in July 2007 are very lucky!
Here is my situation -
Previous Employer -
EB3,PD-Jan'04,I-140 cleared. Switched in June 2007 and wasn't able to file I-485 in July 2007
New Employer -
EB2, PD-Dec'-07, I-140 (Feb'08 - pending)
Question -
Based on Jun'08 Visa bulletin the dates for EB2-India were at Apr'04. Filed for I-140/485 based on my old priority date for EB3 labor (Jan'04). Explaining USCIS for PD transfer.
Well, folks at NSC did not understand the PD transfer concept and send my application back. Unclear as to what do now. I guess need to wait until the dates for EB2-India reach Dec'07 such that I can file.
Any "Creative" thoughts on how to approach USCIS moving forward.
Thanks in advance for your replies.
Aamchimumbai
You do not have to wait till Dec 07 becomes current. I assume when you applied for your second 140, you already requested them to use the earlier EB-3 PD. So when your EB2 140 is approved, it will have the earlier PD, which means you can apply for 485 when your 04 date is current.
Now all you have to do is wait for your 140 to be approved.
I feel that those who concurrently filed I-140/485 in July 2007 are very lucky!
Here is my situation -
Previous Employer -
EB3,PD-Jan'04,I-140 cleared. Switched in June 2007 and wasn't able to file I-485 in July 2007
New Employer -
EB2, PD-Dec'-07, I-140 (Feb'08 - pending)
Question -
Based on Jun'08 Visa bulletin the dates for EB2-India were at Apr'04. Filed for I-140/485 based on my old priority date for EB3 labor (Jan'04). Explaining USCIS for PD transfer.
Well, folks at NSC did not understand the PD transfer concept and send my application back. Unclear as to what do now. I guess need to wait until the dates for EB2-India reach Dec'07 such that I can file.
Any "Creative" thoughts on how to approach USCIS moving forward.
Thanks in advance for your replies.
Aamchimumbai
You do not have to wait till Dec 07 becomes current. I assume when you applied for your second 140, you already requested them to use the earlier EB-3 PD. So when your EB2 140 is approved, it will have the earlier PD, which means you can apply for 485 when your 04 date is current.
Now all you have to do is wait for your 140 to be approved.
satishbsk
07-08 05:58 PM
How do u know that?
When I and my wife gave DNA, the volunteer who collected told that they collected 20 k so far and it is tough to get a match, and it might be only Indian DNA may match to Vinay.
When I and my wife gave DNA, the volunteer who collected told that they collected 20 k so far and it is tough to get a match, and it might be only Indian DNA may match to Vinay.
more...
TwinkleM
07-15 02:04 AM
Thank You sbmallik for your response.
Attorneys, would appreciate your inputs on the above questions...
Also,
Am planning to withdraw my husband's H4 application as he wants to continue his work on EAD.
1) Would this be a problem in his GC journey?
2) If something has to go wrong with my still pending I140, our EAD will not longer be valid. Then, can I apply for his H4 in future?(keeping in mind that his H4 application has been withdrawn right now)
3) Will he need to get out of the country while we file his H4 other then stamping?
4) Am planning to go for stamping to Qubec. Anybody who has recently been there for stamping, could you pls. post your experiences both at the consulate & POE?
Thanx in Advance
Attorneys, would appreciate your inputs on the above questions...
Also,
Am planning to withdraw my husband's H4 application as he wants to continue his work on EAD.
1) Would this be a problem in his GC journey?
2) If something has to go wrong with my still pending I140, our EAD will not longer be valid. Then, can I apply for his H4 in future?(keeping in mind that his H4 application has been withdrawn right now)
3) Will he need to get out of the country while we file his H4 other then stamping?
4) Am planning to go for stamping to Qubec. Anybody who has recently been there for stamping, could you pls. post your experiences both at the consulate & POE?
Thanx in Advance
yabadaba
04-23 09:03 AM
u have to wait till ur 140 is approved...it will tell u which category uscis processed it under.
more...
MatsP
November 9th, 2004, 09:41 AM
Sorry to hear about your problem with the D70...
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
trueguy
08-11 04:06 PM
bump
uma001
09-08 03:22 PM
points mentioned in posts 2,3 4 and 5 are 100% correct.
points mentioned in post 6 can be considered but companies wont agree for that, They wont accept the suggestions/points given by employee.
Exactly same thing happened in my case. Our company prepared position description,posted ads and just before filing PERM,they said we got enough resumes and we found candidates. We cannot file green card. If economy improves after 6 months we will review the scenario and start the process all over again and I was schocked to hear that answer. They received 25 resumes for my position.
Friends,
Green card dream is over. Now it's the time to get back to India or other countries.
points mentioned in post 6 can be considered but companies wont agree for that, They wont accept the suggestions/points given by employee.
Exactly same thing happened in my case. Our company prepared position description,posted ads and just before filing PERM,they said we got enough resumes and we found candidates. We cannot file green card. If economy improves after 6 months we will review the scenario and start the process all over again and I was schocked to hear that answer. They received 25 resumes for my position.
Friends,
Green card dream is over. Now it's the time to get back to India or other countries.
AabTuAgaGC
07-02 05:58 PM
Please, stop rubbing salt on our wounds:mad:
a1b2c3
08-04 06:10 PM
In this case you can not port the PD unless your subsequent I140 is approved ( ie your Feb-08 I-140 is approved) Once this get approved, you can port to already approved EB2-I140 to make your EB2-140 PD same as your EB3-I140 PD.
similar sit and my 485 was accepted with older pd!
what you say maybe true, but pls don't say it so confidently unless your are an attorney!
similar sit and my 485 was accepted with older pd!
what you say maybe true, but pls don't say it so confidently unless your are an attorney!
No comments:
Post a Comment